Description
The patented Link 360™ is a new multi-directional cable manager that is used for height-adjustable mechanisms. Simply add Link 360™ elements to achieve the desired height. Wires and cables are fed from the work surface down through the elements to the weighted foot at the bottom. The Link 360™ is flexible and can be attached to the leg of the table base by use of the Link 360™ magnetic pockets or tape, or it can be free-standing.
Link 360™ Cable Manager Kits are offered complete with 50 Link 360™ elements, 1 Top Connector, 1 Quad Connector, 1 Dumbbell Connector, and 1 Foot Assembly. The Kits can be used for height-adjustable mechanisms up to 51”, and for free-standing use. Special kits are available upon request.
NEW! We are proud to announce that we are now offering Magnetic Pockets for side mount or top mount use on a metal table leg or frame. These Magnetic Pockets are much easier to use than the Clips and will secure the Link 360™ to the workstation much easier than before.
Link 360™ Cable Manager Kits are offered complete with 45 Link 360™ elements, 1 Quad Connector, 1 Dumbbell Connector, and 1 Foot Assembly. The Kits can be used for height-adjustable mechanisms up to 51", and for free-standing use.
Link 360™ Elements can be individually snapped in place into three positions: most flexible, less flexible, and most rigid. The rigid position is best for use with the Link 360™ Clip or Channel.
Link 360™ Foot Assembly is used for free-standing cable manager applications. The Assembly has a weight attached on the inside. It also allows up to four Link 360™ Elements to attach.
Link 360™ Quad Connector is used for connecting up to four Link 360™ Elements underneath a work surface.
Link 360™ Dumbbell Connector is used for connecting female to female connectors on Link 360™ parts or for connecting to a surface by using the hole to put a fastener through.
Link 360™ Wall Plate screws directly onto a traditional 2-power wall or floor outlet. Allows Link 360™ Cable Manager to direct cabling to power source.
Link 360™ Channel allows the Link 360™ to be connected horizontally or vertically to a surface and become a raceway wire manager by adhesive tape or mechanical fasteners. Same as the Clip but 96” in length.
- Carton quantity 1